Vivotek IP8160, Руководство пользователя

Страница: 9 / 351

VIVOTEK
User's Manual - 9
IMPORTANT:
WPS Button Usage
Function LED Behavior
- White - operating in AP mode (default status).
Reset - press less than 3 seconds, Off then Red, then White.
WPS - press 3 to 5 secs, Flashing Blue for 2 mins, then Red, then Green.
Restore default - press longer than 7 secs. Flashing Red and Green
LED Color Indication
Steady Red Power on and system booting
All LED off Power off
Blink Red / Green every 0.15 sec Upgrading F/W
Blink Orange every 0.15 sec Restoring default
Blink Green every 1 sec Wireless AP linked
Blink Blue every 0.15 sec WPS searching
Blink White every 0.5 sec Operating in AP mode
Steady Red Network Failed
Blink Red / Green every 1 sec Connected to network
Refer to the functional description and LED definitions below when configuring the camera.
5. Connecting to network. There are 3 different ways to connect the camera to a wireless
network.
WPS
AP
WEP or WPA-PSK
> 3 secs
WPS
A-1
A: WPS
A-1. Use a straightened paper clip to
press the WPS button for 3 to 5 seconds.
A-2. Press the WPS button on your
wireless AP (router). Some router/
AP have a virtual button on their
management software instead. Refer
to your AP's documentation for details
using its WPS function.
When WPS configuration is done,
wireless connectivity will be established
and the security encryption, such as
WEP or WPA-PSK, will be synchronized
with the AP. Install and use VIVOTEK's
IW2 utility to find the camera. By default,
the camera's firmware uses the DHCP
client mode.
LED Definitions