VIVOTEK
User's Manual - 165
vs
0 ~ 7
0 ~ 15 <SD81X1>
Set the speed of movement, “0” means stop.
x
<integer>
x-coordinate clicked by user.
It will be the x-coordinate of center after movement.
y
<integer>
y-coordinate clicked by user.
It will be the y-coordinate of center after movement.
videosize
<window size>
The size of plug-in (ActiveX) window in web page
resolution
<window size>
The resolution of streaming.
stretch
<boolean>
0 indicates that it uses
resolution
(streaming size) as the range of the
coordinate system.
1 indicates that it uses
videosize
(plug-in size) as the range of the
coordinate system.
focus
auto
Auto focus.
far
Focus on further distance.
near
Focus on closer distance.
iris
auto
Let the Network Camera control iris size.
open
Manually control the iris for bigger size.
close
Manually control the iris for smaller size.
speedlink
0 ~ 4
Issue speed link command.
gaptime
0~32768
The gaptime between two consecutive ptz commands for device. (unit:
ms)
return
<return page>
Redirect to the page
<return page>
after the parameter is assigned
.
The
<return page>
can be a full URL path or relative path according to the
current path. If you omit this parameter, it will redirect to an empty page.
8.10 ePTZ Camera Control
(capability.eptz > 0)
Note:
This request requires camctrl privileges.
Method:
GET/POST
Syntax:
http://<
servername
>/cgi-bin/camctrl/eCamCtrl.cgi?channel=<value>&stream=<value>
[&move=<value>] – Move home, up, down, left, right
[&auto=<value>] – Auto pan, patrol
[&zoom=<value>]
– Zoom in, out
[&zooming=<value>&zs=<value>] – Zoom without stopping, used for joystick
[&vx=<value>&vy=<value>&vs=<value>] – Shift without stopping, used for joystick
[&x=<value>&y=<value>&videosize=<value>&resolution=<value>&stretch=<value>]
– Click on image
Содержание IP8151P
Страница 1: ......
