EN - 10
1. Check the SSID currently set on your wireless access point (AP).
2. Go to IP7152's Configuration > Wireless LAN.
Note:
1.SSID, abbreviated from Service Set Identifier, is the name assigned to the wireless
network. The IP7152's factory SSID setting is set to "default".
2.Select "Ad-Hoc" wireless mode if you want the IP7152 to communicate without
using an AP or wireless router.
POWER
COLLISION
LINK
RECEIVE
PARTITION
1
2
3
4
5
ADSL/Cable/Hub
AP
3. Type in the SSID consistent
with the setting on your AP.
4. Select the Wireless mode as
"Infrastructure".
5. Click Save.
For further setup, please refer to user's manual on the software CD.
