VIVOTEK - A Leading Provider of Multimedia Communication Solutions
50 - User's Manual
■ Keep current value
Follow the steps below to manually set the white balance to compensate for the ambient lighting
conditions�
1� Set the White balance to
Auto
and click
Save
�
2. Place a sheet of white paper in front of the lens; then allow the Network Camera to adjust the color
temperature automatically�
3. Select Keep current value to confirm the setting while the white balance is being measured.
4� Click
Save
to enable the settings�
You can click
Preview
to fine-tune the image, or click
Restore
to recall the original settings without
incorporating the changes� When completed with the settings on this page, click
Save
to enable the
settings and click
Close
to exit the page�
Privacy Mask
Click
Privacy Mask
to open setting page. On this page, you can block out sensitive zones to address
privacy concerns�
■ To set the privacy mask windows,
follow the steps below:
1� Click
New
to add a new window�
2. Use the mouse to size and drag-drop the window, which is recommended to be at least twice the size
of the object (height and width) you want to cover�
3� Enter a Window Name and click
Save
to enable the settings�
4� Select
Enable privacy mask
to enable this function�
NOTE
► Up to 5 privacy mask windows can be set up on the same screen.
► If you want to delete the privacy mask window, please click the ‘x’ on the upper right-hand corner of
the window�
Содержание IP7138
Страница 1: ...IP Surveillance IP7138 IP7139 Mega Pixel ...