VIVOTEK
User's Manual - 209
© 2019 VIVOTEK INC. All Right Reserved
83
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
disableirled
<boolean>
6/6
Enable/disable built-in IR led
* Only available when
capability_daynight_c<0~"capability_
nvideoin"-1>_builtinir > 0
enableextled
<boolean>
1/6
Enable/disable external IR led
* Only available when
capability_daynight_c<0~"capability_
nvideoin"-1>_externalir > 0
enablewled
<boolean>
6/6
Enable/disable built-in White led
* Only available when
capability_daynight_c<0~"capability_
nvideoin"-1>_builtinwled > 0
bwmode
<boolean>
6/6
Switch to B/W in night mode if
enabled.
* Only available when
"capability_daynight_c<0~(n-1)>_
blackwhitemode" is 1.
sensitivity
low,normal,high,1~10
0
6/6
Sensitivity of day/night control.
There are two value format:
"low,normal,high"
: if
capability_daynight_c<0~(n-1)>_ircuts
ensitivity_type=options
"1~100"
: if
capability_daynight_c<0~(n-1)>_ircuts
ensitivity_type=normalize
* Only available when
"capability_daynight_c<0~(n-1)>
_ircutsensitivity_type" is not "-".
spectrum_mode
visible,
ir,
irenhanced,
blueenhanced
<product dependent>
6/6
Set spectrum method .
* Only available when
"capability_daynight_c<0~(n-1)>_spec
trum_support" is 1.
© 2019 VIVOTEK INC. All Right Reserved
84
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
* Available values are
listed in
"capability_daynight_
c<0~(n-1)>_spectrum
_mode".
7.11 Image Setting per Channel
Group:
image_c<0~(n-1)>
for n channel products and m profile
n denotes the value of "capability_nvideoin" and m denotes the value of
"capability_nvideoinprofile"
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
brightness
<Not
recommended to
use this>
-5~5,100
4/4
-5: Darker <-> 5: Bright
100: Use "
image_c<n>_brightnesspercent"
* Only available when bit 0 of
"capability_image_c<0~(n-1)>_basicse
tting" is 1
* We replace "brightness" with
"brightnesspercent".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
contrast
<Not
recommended to
use this>
-5~5,100
4/4
-5: Less contrast <-> 5: More contrast
100: Use "
image_c<0~(n-1)>_contrastpercent"
* Only available when bit 1 of
"capability_image_c<0~(n-1)>_basicse
tting" is 1.
* We replace "contrast" with
"contrastpercent ".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
saturation
-5~5,100
4/4
-5: Less saturation <-> 5: More
Содержание IB9368 Series
Страница 85: ...VIVOTEK User s Manual 85...
