VIVOTEK
92 - User's Manual
2� Adjust the shooting area to the desired position using the keypad, the FOV indicator, or mouse clicks
on the live screen� To begin the mouse control, click on the two interactive windows� If you click on the
Original view window, an
FOV indicator
will appear� You can click and hold down the left mouse button
to drag the FOV indicator to a position you prefer� The rest of mouse control methods are identical to
those for the Regional windows�
Due to the highly-sensitive mouse control, the PTZ control buttons help finetune to an optimal position.
Note that your PTZ preset settings will only take effect on Regional windows, and not on the
Panoramic views�
3� After you selected an area of interest, enter a name for the new position, which can contain up to forty
characters�
4� Click
Add
to enable the settings� The preset positions will be listed on the
User preset locations
� (To
add more positions you wish, please repeat steps 1~3�)
5� Select the preset positions by their checkboxes�
6� Click on the move button (>>)
to move positions to the Rotate locations window�
7� You may select some or all of the imported positions as the stop points during the tour�
8. Select other speed options using their specific pull-down menus.
9� Select a preferred
Rotate speed
for consecutively displaying views of multiple positions� The Rotate
speeds and the dwell time of each position on a Regional view window are shown below:
Rotate speed
Dwell time in sec�
1
6
2
3
3
2
4
1�5
5
1�2
9� Click on the
Save
button to preserve your configuration.
To remove a preset position from the list, select it and click
Remove
� You can re-arrange the order of
the position hop on the list using the
buttons�
