VIVOTEK
User's Manual - 79
■ Refresh: Click this button to refresh all current connections.
■ Add to deny list: You can select entries from the Connection Status list and add them to the
Deny List to deny access� Please note that those checked connections will only be disconnected
temporarily and will automatically try to re-link again (IE Explore or Quick Time Player)� If you
want to enable the denied list, please check
Enable access list filtering
and click
Save
in the
first column.
■ Disconnect: If you want to break off the current connections, please select them and click this
button� Please note that those checked connections will only be disconnected temporarily and
will automatically try to re-link again (IE Explorer or Quick Time Player)�
Enable access list filtering: Check this item and click
Save
if you want to enable the access list
filtering function.
Filter
Filter type
: Select
Allow
or
Deny
as the filter type. If you choose
Allow Type
, only those clients
whose IP addresses are on the Access List below can access the Network Camera, and the others
cannot access� On the contrary, if you choose
Deny Type
, those clients whose IP addresses are
on the Access List below will not be allowed to access the Network Camera, and the others can
access�
Then you can
Add
a rule to the following Access List� Please note that the IPv6 access list column
will not be displayed unless you enable IPv6 on the Network page� For more information about
IPv6 Settings
, please refer to Network -> General settings on page 55 for detailed information�
