- 65 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
Set server parameter values
Note:
This request require administrator access
Method:
GET/POST
Syntax:
http://<
servername
>/cgi-bin/admin/setparam.cgi?
[nosync=
<value>
&]
<parameter>=<value>
[&<parameter>=<value>…][&return=<return page>]
parameter value
description
nosync
0, 1
Specifies that there should be no sync (write) of
the corresponding configuration file on flash. If
parameter is omitted, a sync write will occur.
(note: this parameter must be put at begin of
parameter list)
<group>_<name>.
value to
assigned
Assign
<value>
to the parameter
<group>_<name>.
.
return
<return page>
Redirect to the page
<return page>
after the
parameter is assigned
.
The
<return page>
can
be a full URL path or relative path according the
the current path. If you omit this parameter, it
will redirect to an empty page.
(note: The return page can be a general HTML
file(.htm, .html) or a Vivotek server script
executable (.vspx) file. It can not be a CGI
command. It can not have any extra
parameters. This parameter must be put at end
of parameter list)