VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|
T
:
+886-2-82455282
|
F
:
+886-2-82455532
|
E
:
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
|
T
:
408-773-8686
|
F
:
408-773-8298
|
E
:
VIVOTEK Europe
Randstad 22-133, 1316BW Almere, The Netherlands
T
:
+31(0)36-5298-434
E
:
All specifications are subject to change without noice.
Copyright © 2018 VIVOTEK INC. All rights reserved.
Port Status LEDs
LED
Color State
Description
RJ45 Ports
Up
Green On
The port is enabled and established a link to connected device, and the speed is 1000Mbps.
Green Blinking The port is transmitting/receiving packets, and the speed is 1000Mbps.
Amber On
The port is enabled and established a link to connected device, and the speed is 10/100Mbps.
Amber Blinking The port is transmitting/receiving packets, and the speed is 10/100Mbps.
-
Off
The port has no active network connection, or it has no established link to connected device.
Otherwise, the port may have been disabled through the switch user interface.
RJ45 Ports
Down
Green On
The port is enabled and supplying power to connected device.
Amber On
An abnormal state, such as overload status, has been detected in the switch.
-
Off
The port has no active connection, or it is not connected to a PoE PD device. Otherwise, the port may
have been disabled through the switch user interface.
SFP Ports
Green On
The port is enabled and established a link to connected device, and the speed is 1000Mbps.
Green Blinking The port is transmitting/receiving packets, and the speed is 1000Mbps.
Amber On
The port is enabled and established a link to connected device, and the speed is 100Mbps.
Amber Blinking The port is transmitting/receiving packets, and the speed is 100Mbps.
-
Off
The port has no active network connection, or it has no established link to connected device.
Otherwise, the port may have been disabled through the switch user interface.
Reset button
Task
Method
SYS LED Behavior
Port Status LED Behavior
Reset
Press 2 ~ 7 seconds Blinking Green
All LEDs Off.
Restore Defaults Press 2 ~ 7 seconds Blinking Green
All LEDS On.
DIN Rail Installation
DIP Switch
O
N
1
2
RM
RC
Mode RM
RC
Rapid Ring status
1st Port
2nd Port
LED RM
LED RC
HW
Control
Off
Off
Single Ring member The largest Odd port
number
The largest Even port
number
Amber
Off
HW
Control
On
Off
Single Ring Master
The largest Odd port
number
The largest Even port
number
Green
Off
HW
Control
Off
On
Rapid Chain
The largest Odd port
number
The largest Even port
number
Off
Green (Active path);
Amber (Backup path)
SW
Control
On
On
Rapid Ring settings
by SW
-
-
-
-
RM: Ring Master
RC: Rapid Chain
All manuals and user guides at all-guides.com
