Publication date:Aug., 2014
Revision A1
52
4-2-2. System Time
Function name:
Port Configuration
Function description:
This page configures the switch Time. Time configure is including NTP
Configuration.
Fig. 4-4Time Configuration
Parameter description:
State:
Enable or disable System time
NTP Server:
NTP is Network Time Protocol and is used to sync the network time
based Greenwich Mean Time (GMT). If use the NTP mode and select a
built-in NTP time server or manually specify an user-defined NTP server
as well as Time Zone, the switch will sync the time in a short after
pressing <Apply> button. Though it synchronizes the time automatically,
NTP does not update the time periodically without user’s processing.
Time Zone:
Time Zone is an offset time off GMT. You have to select the time zone
first and then perform time sync via NTP because the switch will combine
this time zone offset and updated NTP time to come out the local time,
otherwise, you will not able to get the correct time. The switch supports
configurable time zone from –12 to +13 step 1 hour.
Default Time zone: +8 Hrs.
Current Time:
Show the current time of the system.
