10/100/1000 RJ45
data ports
100/1000 SFP ports
DC input
LEDs
VAC 100~240 power input
10/100/1000 RJ45
PoE ports
1. Install the PoE switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the switch are not blocked.
3. Use CAT5 or 5e UTP/STP cables.
4. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 150W.
IMPORTANT
:
INTRODUCTION
LED DEFINITIONS
CONNECTION
* 1x PoE switch
* 1x Quick Installation Guide
* 1x T30 L-wrench, 4x wall anchors
PACKAGE CONTENTS
Power1
Green ON
Power is on and normal.
Green Off
The switch is not receiving power.
Power2
Green ON
Power is on and normal.
Green Off
The switch is not receiving power.
RJ45 ports
LED1
Green ON
Port is enabled and link established with a device at the 1000Mbps speed.
Grren Blinking
Port is transmitting and receiving data at the 1000Mbps speed.
Amber ON
Port is enabled and link established with a device at the10/100Mbps speed.
Amber Blinking
Port is transmitting and receiving data at the 100Mbps speed.
Off
No active network connection. The port may have been disabled through user interface.
RJ45 ports
LED2
Green ON
The port is enabled and supplying power to connected device.
Amber ON
An abnormal state, such as overload status has occurred.
Off
The port has no active network cable connected, or it is not connected a PoE PD device. Otherwise, the port may have
been disabled through the switch user interface.
SFP ports
Green ON
Port is enabled and link established with a device at the 1000Mbps speed.
Grren Blinking
Port is transmitting and receiving data at the 1000Mbps speed.
Off
No active network connection. The port may have been disabled through user interface.
AW-GET-083A-120
Quick Installation Guide
The AW-GET-083A-120 is a 4 port 10/100/1000BaseT PoE switch capable of feeding 15.4/30W (54V max. per port)
power to Power over Ethernet (PoE) devices. It comes with another 2x GbE Ethernet and 2x GbE SFP port. The switch is
capable of a total of 120 Watts PoE power budget.
Outdoor PoE Switch
Port LED1
Port LED2
RESET
Reset the switch
Hold Reset Button 2 seconds
All LEDs On/Off