Vivotek AI-102, Руководство по установке, Страница: 6 / 10

6
FD8362 GPIO Pinouts
Shown above is the network camera's General Purpose IO terminal block. Connect the IR
illuminator's red and blue lines to pin7 and pin5 on the terminal block.
8 7 6 5 4 3 2 1
Red: Digital Output
Blue: Ground
1 DC 12V-
2 DC 12V+
3 AC 24V_2
4 AC 24V_1
5 DI- (GND)
6 DI+
7 DO-
8 DO+ (12V)
For Ethernet
Cable
For Power & IO Cables
Top View
Power and IO cables pass through a waterproof
connector. All cables are user-supplied.
Replace the side opening cover with the included
side outlet bushing if you want to route cables
from the side of camera. The 1/2" protection
conduits and tubing are separately purchased.
Tips
Remove the plastic cap on the opening for IO cables
and replace it with the included waterproof connector.