21
English
Below is a general, sample procedure using a Corner mount bracket:
1. Combine the two brackets together using the included nuts and washers.
2. Align the assembled brackets with the desired position. Align screw holes on the
brackets against the wall. Drill holes on the wall for securing the bracket and for routing
the cables. Hammer anchors into the wall. Wall anchors are user-supplied.
3. Route power lines and other cables through the included cable gland, conduits
(separately purchased), and install the cable gland to the brackets' through hole in the
center.
1
3
2
5
4
6
4. Secure corner mount brackets to the wall. Screws are user-supplied.
5. Fill the unused holes on the bracket with the included silicone stoppers.
6. Use the included hex bolts, washers, and nuts to secure the gooseneck to the corner
mount bracket.
7. The rest of the mounting procedure is identical to those described in the
Gooseneck
bracket
Outdoor
Enclosure
3-5. Corner Mount Installation
Corner Mount
Bracket
Cable gland and 3/4" conduits
IMPORTANT:
The screws and mounting surface must
be able to support a weight of 6 kg.
IP8152_housing_ig_VVTK_v1.0_20121206.indd 21
2013/1/10 下午 01:36:49
