VIVOTEK
User's Manual - 25
Auto Focus
There are two options for you to fine-tune the camera focus.
Press the button, and the camera firmware will automatically perform an auto-sensing process on its
vari-focal lens to look for the best focus. The process takes about a minute to complete. This function
applies when you see the image is out of focus when the surrounding lighting condition is changed
drastically for some reasons. You can press the button for longer than 1 second to perform a full-range
scan. Forcing a re-focusing may improve the image quality.
Global View: Click on this item to display the Global View window. The Global View window contains a
full view image (the largest frame size of the captured video) and a floating frame (the viewing region of
the current video stream). The floating frame allows users to control the e-PTZ function (Electronic Pan/
Tilt/Zoom). For more information about e-PTZ operation, please refer to E-PTZ Operation on page 94.
For more information about how to set up the viewing region of the current video stream, please refer to
page 90.
The viewing region of
the current video
stream
The largest frame size
Auto Focus Button
PTZ Panel: This Network Camera supports “digital PTZ“ (e-PTZ). Please refer to PTZ settiings on page
94 for detailed information.
1. For a megapixel camera, it is recommended to use monitors of the 24" size or larger, and
are capable of 1600x1200 or better resolutions.
2. Below are the defaults for Audio settings:
For cameras with built-in microphone:
Not Muted.
For cameras without built-in microphone:
Muted.
To receive audio into from external microphone, you may need to enable the audio input
from Media > Audio. Refer to page 62 for more information.
NOTE:
