Operation Instructions
Step 1.
Shaved ice may melt so it is strongly recommended to connect the drain pipe at bottom of the unit to
pool
Sketch for step 1
Sketch for step 2
Step 2.
Open the lid, take out of the ice basket and fill the water reservoir with water.
Note: Make sure the water is not over the bottom of the ice collecting tray.
If you prefer to fill the water automatically then insert the water pipe into the socket at back of the unit as
below.
Step 3.
Connect to the power.
Step 4.
Press
button to turn unit on. The ice maker begins to work.
Note: For the first three cycles, the ice may be small and irregular in size, or even no ice.
Step 5.
If indicator
lights up, please take out the basket, then add water as per step 1
，
then press
to
restart the ice maker
Step 6.
If indicator
lights up, please take out the ice with the scoop.
Note: When the ice basket is full please remove the ice immediately, Do not allow
the ice collecting tray overfill.
Step 7.
Press
button to shave ice.
