Function buttons:
The digital control allows easy adjustment of dehydration temperature and time.
1. Place the dehydrator on a dry smooth surface
2. Place food on the trays and load into the machine
Note:
It is recommended to stack at least 3 working trays, whether you have food on them or
not.
3. Connect the power supply., the screen will shows “
0000
”
4. To set Timer and Temperature
1).
Setting Timer
(00:30-99:00)
Press
TIME/TEMP
button the display will show default time
10.00
and flash, and then press
the
“
+
”or
“
-
”
buttons until the desired time is displayed. To change the time rapidly, hold
down the
“
+
”or
“
-
”
buttons.
2).
Adjusting Temperature (FAN-35
℃
–40
℃
-45
℃
-50
℃
-55
℃
-60
℃
-65
℃
-70
℃
)
Press
TIME/TEMP
button again, the display window will shows temperature
70
℃
and flash,
and then press
“
+
”or
“
-
”
buttons to select the desired temperature. To change the
temperature rapidly, hold down the
“
+
”or
“
-
”
buttons.
Remark :
When you set the temperature to “
FAN
“mode,
then only the fan keep working ,heater will stop working .
5 After finished setting time and temperature.
Press
TIME/TEMP
button ,the unit will start to work .
The time in the display window will begin to countdown.
NOTE:
if you press
TIME/TEMP
again to stop dehydration, the timer countdown will reset and
the dehydrator will go into standby mode.
The dehydrator will automatically shut off after the set time has expired,the heating element
stops working first, the fan will continue running for 10 seconds and the buzzer rings 5 times
"beep" sound (1 time/second) and screen will shows “End”
Unplug the unit.
If dehydration is completed, remove food from dehydrator.
If additional drying time is needed, follow the preceding steps to continue dehydrating.
