3
Step 5 (Continued) (Continued)
Step 6
5 (Continued)b
If bolts are too long, spacer (M-F) may be required.
Slide VESA plates (A) into brackets (B) and secure using thumb screws
(M) as shown in diagram.
Step 7
Adjust tension in monitor
bracket with 6mm allen key (P).
Step 4
Step 5 (Continued)
Attach pole (E) to pole (D) using pole connector (G). Tighten grub
screws in pole connector using 3mm allen key (N). Slide cable
management clip (H) and bracket (B) onto pole (E) and tighten using
6mm allen key (P).
Attach VESA plates (A) to back of monitors using bolts (M-A, M-C) and
washers (M-E).
5 (Continued)a
M-B
M-D
