4
STEP 3
Attach the base poles (5) to the tube connector (3) using M6x10 bolts (13) in the back. Attach the pole
connectors (7) to the tops of each base pole (5).
Carefully thread the pole connector in perfectly straight to avoid cross-threading. If you feel resistance,
back the connector out and restart. Once you are certain the connector is going in straight, use
additional force to tighten.
NOTE: The pole connector threads are very fine and could be sharp. It may be helpful to grip the pole
connector with a cloth or towel to produce sufficient force in order to thread into the poles.
STEP 4
4a: Slide the tube connector cover (4) over the
base poles (5) and fit over the tube connector (3).
4b: Thread the top poles (6) to the pole connectors
(7) and insert the pole covers (8) into the top.
5
7
13
4
Remove plastic sleeves
before attaching the part 4
6
8
