Vivo STAND-SIT2W Скачать руководство пользователя

Страница: 4 / 8

STEP 2

Remove two lower screws from back of pole

(B) and set aside. Attach tray (C) to pole using M8x24

bolts

(F), and tighten with 6mm Allen wrench (H).

STEP 4

Slide decorative covers

(E) on arm (A).

STEP 3

Remove knobs and slide VESA plates off from

brackets. Set parts aside for later use.

Содержание STAND-SIT2W

Страница 1: ...bile device or follow the link for helpful videos and specifications related to this product Instruction Manual https vivo us com products stand sit2w SKU STAND SIT2W help vivo us com www vivo us com 309 278 5303 Chat live with an agent GET IN TOUCH Monday Friday from 7 00am 7 00pm CST ...

Страница 4: ...k of pole B and set aside Attach tray C to pole using M8x24 bolts F and tighten with 6mm Allen wrench H STEP 4 Slide decorative covers E on arm A STEP 3 Remove knobs and slide VESA plates off from brackets Set parts aside for later use E H G F ...

Страница 5: ...viously removed bracket and screws making sure adjustment screws on monitor brackets are facing up Tighten with 4mm Allen wrench G STEP 7 Loosen top two screws on back of pole B until 5mm of thread is exposed on each Slide pole onto mount of arm A Attach with previously removed screws and tighten all screws with 4mm Allen wrench G G G G 3 5mm G 1 2 ...

Страница 7: ...n wrench H if knobs are too stiff to turn by hand Adjust rotation of tray C using 4mm Allen wrench G as shown if tray is not level To adjust tray to 10 tilt angle first flip the tray up fully then turn the supports in front of the hinge upward Set the keyboard tray back down Allen wrenches G H can be stored underneath the keyboard tray as shown H H 15 15 G 4 4 0 10 10 G H ...