7
STEP 8
(Continued)
OPTION B: Left Side Shift Lever
Attach the shifter mount
(W)
to the shifter support bar
(V)
using M6x15 bolts,
making sure the long end faces back, and tighten with a Phillips screwdriver. Install
the shifter support bar
(V)
to the left side of the frame using M8x50 bolts
(Y)
and
nuts
(Z)
. Tighten using the 5mm Allen wrench
(C1)
and wrench
(D1)
. Adjust the
mount angle by removing the pre-installed bolts from the sides, then reinstall while
holding the mount at the desired angle.
STEP 9
Attach the cable clips
(A1)
to the frame for organizing cables. Use the levers on the right
side and underneath to adjust the seat angle and position.
