2
3
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
ASSEMBLY STEPS
WARNING:
FOLLOW INSTRUCTIONS TO PREVENT PRODUCT DAMAGE AND/OR PERSONAL INJURY:
•
DO
NOT
FOLD SCREEN
•
DO
NOT
USE FINGERS OR HARD OBJECTS TO TOUCH SCREEN SURFACE
•
DO
NOT
SPLASH LIQUIDS OR CHEMICALS ON SCREEN SURFACE
•
KEEP SCREEEN
AWAY
FROM HOT OBJECTS OR FIRE
PACKAGE CONTENTS
Electric Projection
Screen Unit
Remote Control Wall
Mount Caddy
Remote Control
NOTE:
Hooks not included
STEP 1
OPTION A: Wall Installation
Insert screws in wall directly for wood studs. If anchors are needed, press anchors into holes first and
insert screws into anchors. Screw heads should be spaced about 1/4” from the wall.
Carefully line up mounting holes on projector screen with screw heads, and hang in place making sure
slots are fully seated over screw heads.
STEP 2
Drill holes in wall or ceiling to match the distance
between mounting holes or hooks on the
screen. Using a level for drilling holes in wall is
recommended.
NOTE:
Use a 3/32" drill bit for wood stud
wall installation, 1/4" bit for concrete
wall installation, or a 3/8" bit for ceiling
installation.
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
•
DO
NOT
CLEAN PRODUCT WHILE POWER IS CONNECTED.
•
DO
NOT
DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
•
NEVER
OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS.
•
NEVER
OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS.
•
ALTERATIONS OF THE GIVEN POWER UNIT ARE
NOT
ALLOWED.
•
OUTDOOR USE IS
PROHIBITED
