3
Programmin Screeng multiple s Required: creen Screens Required: to a s Required: in Screengle remote
Programming
Step 1: Hold the stop button on the wall control unit for 5 seconds,
and two beeps will sound.
Step 2: Press any button on the remote to pair the screen with the
remote.
Step 3: Repeat the process for each screen. All programmed
screens within range will then respond to the same remote.
Resetting
Step 1: To clear screen remote memory, press and hold the
stop button on the wall control unit until two beeps
sound, and continue holding until an additional three
beeps sound.
Step 2: Press and hold the button again until two beeps
sound, and then press any button on the remote
you would like paired with the screen.
Step 2
To lower the screen: press the down arrow button on the
remote or wall unit. When the screen has reached the desired
height, press the center stop button.
or
To raise the screen: press the up arrow button on the remote
or wall unit. When the screen has reached the desired height or
fully retracted, press the center stop button.
or
