3
ASSEMBLY STEPS
STEP 1
STEP 2
OPTION A: Flush Fit
Attach clamps
(A)
to panel
(F)
using
M6x30 screws
(D)
and washers
(C)
.
Tighten with a Phillips screwdriver.
Place the assembled panel on the edge
of the desk, and tighten the clamps to
secure.
NOTE:
Over-tightening the clamps will
cause the panel to lean forwards.
OPTION B: Gap-Fit for Cables and
Devices
Attach clamps
(A)
to panel
(F)
using
M6x40 screws
(E)
washers
(C)
and
spacers
(B)
as shown in the diagram.
Tighten with a Phillips screwdriver.