4
STEP 3
(Option A)
Wood Wall Installation
Use Stencil
(C)
to mark mounting holes on the wall where a stud is located, and drill 55mm (2.2”) deep
holes using 4.5mm (3/16”) bit. Use of a stud finder and level is recommended. Mount Wall Plate
(B)
to
the wall using
ST6.3x55mm Screws
(W-A)
and M6 Washers
(W-C)
. Do not use Concrete Anchors
(W-B)
for
wood stud or drywall installation.
STEP 3
(Option B)
Concrete/Brick Wall Installation
Use Stencil
(C)
to mark mounting holes on the wall. Using a 10mm (3/8”) drill bit, drill holes at least
60mm (2.4”) deep into marked locations. Use of a level is recommended. Press Concrete Anchors
(W-B)
into holes. Mount Wall Plate
(B)
to the wall using
ST6.3x55mm Screws
(W-A)
and M6 Washers
(W-C)
.
C
B
W-A
W-C
W-B
C
W-B
B
W-A
W-C
