2
ASSEMBLY STEPS
STEP 1
Position Track (
A
) underneath the desk, at
least 20 mm (0.8”) from the edge of the desk,
and mark hole locations with a pencil. Drill
pilot holes using a 3/32” drill bit.
Using
ST4.2x16
Screws
(S-A)
, attach Track
(A)
underneath the desk (Leave front three
mounting holes unused at this time.) Mount
Track Guard
(B)
to the rear holes using
ST4.2x16
Screws
(S-A)
.
PACKAGE CONTENTS
TOOLS NEEDED
WARNING!
Phillips
Screwdriver
A
(x1)
Track
B
(x2)
Track Gaurd
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
Drill
4.4lbs
(2kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
C
(x1)
Arm
D
(x1)
Tray
S-A
(x14)
ST4.2x16 Screw
S-B
(x4)
M5x20 Bolt
S-C
(x4)
M5 Nut
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Pencil
Wrench
