3
STEP 2
Insert VESA Adapter
(A)
into the monitor until it locks in place, then insert M4x12 Screw
(S-C)
and M4
Washer
(S-B)
through the top of the adapter and into the hole in the monitor. Tighten securely with a
phillips screwdriver.
STEP 3
Connect the VESA plate to the VESA Adapter
(A)
using M4x10 Thumbscrews
(S-A)
and remaining
Washers
(S-B)
. Partially insert M4x50 Screws
(S-D)
into the top two unused holes of the VESA plate
and VESA Adapter
(A)
. Place Rubber Pads
(S-E)
on the ends of the screws, and tighten until pads are
pressed lightly against the monitor.
NOTE:
Once the thumbscrews are finger-tight, it is not necessary, but recommended to tighten
slightly more with a phillips screwdriver.
A
S-B
S-C
A
S-A
S-B
S-D
S-E
