3
STEP 3
Mount the adapter with monitor to your VESA mount using M4x12mm thumbscrews
(B)
.
Insert x2 M4x75mm screws
(D)
partially into the unused upper holes, then place the soft
pads
(E)
on the ends of the screws. Tighten the screws with pads against the back of the
monitor with a Phillips screwdriver until snug.
NOTE:
Once the thumbscrews are finger-tight, it is not necessary, but recommended to
tighten slightly more with a Phillips screwdriver.
STEP 2
(Optional)
If you plan to use your monitor in a sideways (portrait) configuration, the M4 washer
(C)
and x1 M4x75mm screw
(D)
may be inserted into VESA adapter
(A)
to provide additional
stability. Use a Phillips screwdriver to tighten slightly.
CAUTION:
For safety, the monitor should not be rotated upside down.
