Vivo LTV32HD, Руководство по эксплуатации для владельца

Страница: 4 / 31

Safety Precaution
♦
Do not place the TV on unstable places, from which it may be fell off.
Do not expose the TV to extreme temperature and humid environment.
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
Avoid subjecting the TV to direct sunlight and other heat sources.
Do not put the TV into any liquid.
Do not put anything inside the TV, or place water container on top of the TV.
In thunder rainy days (especially with lightening), please plug out the power plug and antenna plug.
Do not step on the power cable, or tangle them together.
Avoid overload of the exterior electric outlet to prevent fire hazard of electric shock.
Clean the TV with dry and soft cloth (without evaporative matter).
If your TV is broken, do not repair it by yourself, but contact the maintenance personnel.
If the remote control is left unused for a long time, please take the batteries out and store them in dry places.
Avoid dropping the remote control.
If the LCD TV is installed for exhibition purpose, please do not place the overheated part on the ground or
carpet to prevent accident.
Please install the TV at proper position, such as wall or ceiling. Please install it under the guidance of
Professional staff. (When used or exhibit, please do not place the TV horizontally or vertically on the ground.)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment should avoid from waterdrops “and” things that fill with liquid, such as vases,
cannot be placed on this equipment.
This equipment is predeterminated to work constantly (unless adding switch on this equipment).
Please disconnect the power cord before long time unused.
Basic Operations
Power on/off
1. Use AC 100-240V power outlet for the TV power supply.
2. If the screen of TV is not on, please press the power button on the remote control or on the TV.
3. If you want to shut the TV temporary, please press the power button on the remote control or on the TV.
4. If your want to shut off the TV completely, please plug out the power plug.
Auto screen shut off function
Pre-shut off memory
Precaution of signal source application
The TV will enter idle state if there is no signal input within 5 minutes.
The setting and tuning of picture and sound will be saved when the TV is shut off, which will be working
in the pre-shut off state when the TV is turn on again.
1. If PC signal source is used, please first set the resolution of the PC display card as the following modes:
(1360X768 60Hz, 1280X768 60Hz, 1024X768 60 , 800X600 60 )
2. If there is line-by-line output of the signal used by the user, signal source with line-by-line output is recommended.
Hz Hz
3