2
3
ASSEMBLY STEPS
STEP 1
OPTION A: Wood Ceiling
Using ceiling template
(C)
, mark exact location of
mounting holes. Drill pilot holes 2.2” deep, using
a 4.5mm drill bit. Insert two screws
(W-A)
, leaving
a 5mm gap from ceiling. Hang the ceiling mount
so that the screws fit into the keyhole openings.
Slide mount forward, then secure using additional
screws
(W-A)
with washers
(W-C)
. Tighten all
screws.
PACKAGE CONTENTS
WARNING!
A
(x1)
Mount
B
(x1)
VESA Plate
C
(x1)
Ceiling
Template
M-F
(x4)
D5 Washer
M-G
(
x8)
D8 Washer
M-H
(x8)
Small
Spacer
W-A
(x6)
Bolt
M-E
(x4)
M8x50
M-A
(x4)
M5x14
M-B
(x4)
M6x14
M-C
(x4)
M6x30
M-D
(x4)
M8x30
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE:
NOT ALL HARDWARE INCLUDED WILL BE USED
W-C
(x6)
Washer
W-B
(x6)
Anchor
OPTION B: Concrete Ceiling
Using ceiling template
(C)
, mark exact location of
mounting holes. Drill pilot holes 2.4” deep, using a
10mm drill bit. Insert six concrete anchors
(W-B)
,
then tighten two screws
(W-A)
, leaving a 5mm gap
from ceiling. Hang the ceiling mount so that the
screws fit into the keyhole openings. Slide mount
forward, then secure using additional screws
(W-
A)
with washers
(W-C).
Tighten all screws.
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.
com, email at [email protected], or call us at 1-800-371-5654.
D
(x1)
Decorative Cover
E
(x2)
VESA Adapter
F
(x2)
VESA Adapter
G
(x1)
IR Receiver
H
(x1)
Remote
Control
I
(x1)
Power Supply
J
(x4)
Cable Tie
M-I
(x8)
Big
Spacer
66lbs
(29.94g)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
TOOLS NEEDED
Phillips
Screwdriver
Drill
Pencil
