4
5
STEP 3
STEP 5
STEP 4
STEP 7
STEP 8
Place tabletop upside down on the floor.
Place frame assembly upside down on
tabletop, and adjust the crossbars to the
appropriate length.
Tighten all set screws with the
Allen wrench
(S-I)
.
Using the side brackets
(C)
as a guide, drill pilot holes into
the tabletop using a 3/32” drill bit.
Press the corner foot
(F)
onto the cor-
ner column. Place the feet
(E)
on the
side columns as shown. Insert M6x16
bolts
(S-B)
into the four mounting
holes on each foot and tighten with
Allen wrench
(S-I)
.
Attach the fixing plate
(G)
to the frame using M4x6 flat
head bolts
(S-E)
. Tighten screws with a screwdriver.
Connect control panel
(M)
, lifting columns
(D)
and power cord
(I)
to the control unit
(H)
. If
needed, use the extension cord
(J)
to connect the
farthest lifting column.
S-I
STEP 6
S-B
S-I
F
E
STEP 9
Slide the control unit
(H)
onto the fixing plate
(G)
.
