3
STEP 1
Pull back on the base/clip and attach the lamp to the top edge of the monitor.
STEP 2
Plug the USB charging cable into the lamp, then connect to a computer USB port or
USB wall charger to charge the battery. Please note, the power output of the USB
port or charger must be at least 1A.
STEP 3
OPERATION
POWER:
Touch the Power icon in the center to turn the lamp on or off.
DIMMER:
Touch the dimmer icon on the left to change the brightness of the lamp to
5 different settings.
CCT:
Touch the CCT icon on the right to change the color temperature to 5 different
settings for a cooler or warmer appearance.
MEMORY:
When powered off, the current DIMMER and CCT settings will be saved.
When powered back on, the lamp will start at the saved settings.
CARE
Clean the lamp only with a dry cloth. To avoid damage to electrical components, do
not expose to water or liquid cleaners.
REMOTE CONTROL OPERATING INSTRUCTIONS
DESK-LTSB1
MODEL
