3
TROUBLESHOOTING
Error
Code
Description/Resolution
E10
Sensorless Alarm. This alarm triggered when the sensor cannot be detected. Power off
desk and check the connection between the motor and control panel, then re-power.
E20
Overload Alarm. Remove desk items and try again.
E02
Rebound Protection. Check for desk vibration, obstacles, or desk incline. If no issues
found, complete the reset process and try again.
E32
Overvoltage Alarm. Voltage is higher than allowed value. Power off desk and check
connection between power and control panel. Power on again.
E31
Undervoltage Alarm. Voltage is lower than required value. Power off desk and check
connection between power and contorl panel. Power on again.
HOT
Overheated Alarm. Power off and wait 18 seconds before use again.
