3
Attach the Cross Bar
(B)
to each of the Support
Columns
(A)
using M6x25 Screws
(S-A)
. Note that
the larger hole in the Cross Bar
(B)
should be facing
upwards. Tighten with the 4mm Allen Wrench
(T-B)
.
STEP 2
With the column assembly flipped upside
down, secure the Feet
(C)
to the Support
Columns
(A)
using M6x12 Screws
(S-B)
.
Tighten with the the 4mm Allen Wrench
(T-B)
.
Note
: make sure the longer end of the foot
(C)
is on the same side as the longer end of the
Support Columns
(A)
.
Attach the Support Columns
(A)
to the Desktop
(F)
using M5x12 Screws
(S-C)
. Tighten using the
Philips end of the 4mm Allen Wrench
(T-B)
or a
Phillips screwdriver.
STEP 4
Loosen the levers on the Support Columns
(A)
to adjust the height of the desktop.
Front
Larger Hole
A
S-A
T-B
A
T-B
S-B
C
S-C
T-B
F
A
STEP 3
STEP 5
Front
B
