Vivitek Qumi Z1V, Руководство пользователя

Страница: 5 / 40

5
Qumi Z1V Installation Notice

Allow at least a 500mm (20”) clearance around the exhaust vent.

Make sure that the intake vents do not recycle hot air from the exhaust vent.

When operating Qumi Z1V in an enclosed space, make sure that the surrounding air
temperature within the enclosure does not exceed the operating temperature while
Qumi Z1V is running, and the air intake and exhaust vents are unobstructed.

All enclosures should pass a certified thermal evaluation to make sure that Qumi Z1V
does not recycle exhaust air, as this may cause the device to shut down even if the
enclosure temperature is with the acceptable operating temperature range.
CAUTION : Avoid usage of Qumi Z1V in dusty environments.
Power Supply Safety

Only use the supplied adapter.

Do not place anything on the cord. Place the cord where it will not be in the way of
foot traffic.

Remove the battery from the remote control when storing or not in use for a
prolonged period.
Cleaning Qumi

Before cleaning, disconnect the power supply cables. Refer to Powering
On/Off the Projector on page 15 .
NOTE : Qumi Z1V will be warm after usage. Allow Qumi Z1V to cool down
before storing away.
Control Warning
Before installing and using Qumi Z1V, read the regulatory notices in the Regulatory
Compliance on page 6 .
500 mm
(20 in.)
!