Vivitek DU8190Z Скачать руководство пользователя

Страница: 44 / 58

DU8190Z DLP Projector - User Manual

UM81900217EN00

OSD Menu

– CONTROL

Language

Select desisted OSD language, the available languages options are English, Española, Deutsch, Portuguese,

简体中文

繁體中文

日本語

한국어

Projection Mode

The projection mode option can be used to change the orientation of the projected image or flip the projected image.

Front Desktop:

Install the projector on the table and project the image on the screen forward.

Front Ceiling:

Mount the projector on the ceiling and project the image on the screen forward, the image is

overturned.

Rear Desktop:

Install the projector on the table and project the image from the rear of the screen.

Rear Ceiling:

Mount the projector on the ceiling and project the image from the rear of the screen, the image is

overturned.

Cooling Condition

The projector is equipped with orientation sensor for switching cooling condition automatically; you can set it to Auto or

adjust the cooling condition by manual.

Front:

The projector is installed on the table.

Ceiling

+ Front: The Projector is mounted on the ceiling.

Freetilt:

The projector is installed with tile angle; the angle is over 30 degree.

Auto:

Built-in sensor detects the installation orientation and switches to corresponding cooling condition.

High Altitude

Use this function to adjust the cooling fan of the projector to get well cooling if the projector is installed in an area over

5000 feet. The projector is equipped with altitude sensor which is capable of detecting atmosphere pressure for estimating

altitude; it can adjust automatically to corresponding setting based on estimated altitude if this option is set to Auto. If you

prefer to set it by manual, you can select On or Off.

Note:



Incorrect Projection Mode setting may affect hot air exhausting from the projector, the heat and high

temperature may cause the projector to enter system protection or damage component.

Содержание DU8190Z



























































Результаты поиска

Содержание DU8190Z

Отзывы:

Похожие инструкции для DU8190Z

Бренды по названию

Популярные бренды

Vivitek DU8190Z, Руководство пользователя

Результаты поиска

Содержание DU8190Z

Отзывы:

Похожие инструкции для DU8190Z

Бренды по названию

Популярные бренды