DU6693Z DLP Projector - User Manual
41
UM66931217EN00
OSD Operation - SETUP
Language
Select the OSD Menu language. English, French, Spanish, Deutsch, Portuguese, Simplified Chinese, Traditional,
Japanese and Korean.
Light Power
There are three options under Light Power for adjusting or fine turning the light power to set the desired brightness output.
Laser Mode:
Use the
◄
or
►
buttons to select the Eco, Normal or Custom Power Level mode.
Eco:
Projector operates in the energy-saving mode, which is equivalent to 80 % power of light source.
Normal:
Projector operating with normal light power can obtain the brightest projection display.
Custom Power Level:
User can enable the custom power level mode.
Custom Power Level:
Select this function and use the
◄
or
►
buttons to adjust light power to between 100% and 35%.
Note: this function is enabled only when Laser Mode is set to the Custom Power Level.
Constant Brightness:
Select On to enable this function
.
A built-in light sensor inside the projector monitors the level of
light so that when a reduction in light is detected, the sensor will regulate dynamically the electricity power to increase the
light output to your pre-defined brightness level, and thus maintaining a constant level of brightness.
To enable this function, first in the SETUP -> Light Power -> Laser Mode, enable the Customer Power Level. Second, in
the SETUP -> Light Power -> Custom Power Level, select a value under 100%. Then turn the Constant Brightness
function to On to enable it.
Note:
This function is only enabled when the Customer Power Level is set at less than 100%. The reduced
power percentage will be used to later regulate the brightness when the Constant Brightness function is
enabled.
Startup Logo
Use the
◄
or
►
buttons to turn on/off the Startup Logo.
