DLP Projector—User’s Manual
Power Safety
Ü
Only use the supplied power cord.
Ü
Do not place anything on the power cord. Place the power cord where it will not be in the way of
foot traffic.
Ü
Remove the batteries from the remote control when storing or not in use for a prolonged period.
Replacing the Lamp
Replacing the lamp can be hazardous if done incorrectly. See
Replacing the Projection Lamp
on page 40
for clear and safe instructions for this procedure. Before replacing the lamp:
Ü
Unplug the power cord.
Ü
Allow the lamp to cool for about one hour.
Cleaning the Projector
Ü
Unplug the power cord before cleaning. See
Cleaning the Projector
page 43.
Ü
Allow the lamp to cool for about one hour.
Regulatory Warnings
Before installing and using the projector, read the regulatory notices in the
Regulatory Compliance
on
page 54.
Important Recycle Instructions:
Lamp(s) inside this product contain mercury. This product may contain other electronic waste that
can be hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal
Laws. For more information, contact the Electronic Industries Alliance at
WWW.EIAE.ORG
. For lamp
specific disposal information check
WWW.LAMPRECYCLE.ORG
.
Symbol Explanations
DISPOSAL: Do not use household or municipal waste collection services for
disposal of electrical and electronic equipment. EU countries require the use
of separate recycling collection services.
—
iv
—
