Vivitek D-530MX, Руководство пользователя

Страница: 25 / 43

24
DLP
Operational Indicator (LED)
There is one LED on the top of the projector to indicate the status of the projector
and the lamp. It provides valuable information about the projector:
LED COLOR STATUS MEANING
Green Solid The projector is powered on and ready.
Green Flashing
LAMP (T urning on):
When the Power button is pressed, the lamp will turn
on and the LED indicator will light in green. If it is not
successfully on, the lamp will automatically attemp to
ignite two more times. If the lamp still cannot be turned
on afterwards, wait 30 seconds for projector to cool
down (LED indicator flashes red). When the LED
indicator turns red, press the Power button again to
light up the lamp.
LAMP (T urning off):
When turning off the lamp, the LED indicator will flash
(green) to indicate the projector is shutting down.
At the same time, the fan will continue for 2 minutes,
and then the LED indicator will turn red and the fan
will shut down indicating the lamp has cooled down.
Note:
Do not unplug the power cable or turn the power switch
Off before the lamp LED becomes red. During the
cooling & warming up processes the projector won’t
accept any key in command.
Red Solid When main power is turned on, the projector is in
standby mode. (Lamp off)
Red Flashing Error messages as the following:
1. There is a problem with the projector fan - the
projector cannot start up.
2. The projector lamp failed to ignite after 3 attempts.