10
Initial Camera Setup
When powering the camera ON
for the first time
the camera will take you through the initial
camera setup.
Powering the Camera ON
1) Make sure the battery has been inserted properly and fully recharged.
The battery must be inserted all the way. The battery latch should cover the battery if inserted
correctly.
Note:
Some features, such as Flash, will not work if the battery power level is low.
When the battery power is low the battery icon turns red and the camera will
automatically turn off a few seconds later.
The energy status of the power is displayed on LCD as shown below:
Full battery power
Medium battery power
Low battery power
