5
When powering the camera ON for the
first time
the camera will take you through the
initial
camera setup.
Powering the Camera ON
1)
Batteries
Make sure the batteries have been inserted properly into your digital camera.
Use 3x AAA (1.5v) batteries. Alkaline batteries are recommended. (Batteries not included.)
2)
SD Card
Make sure an SD card has been properly inserted into your camera. (SD card not included.)
To properly insert your SD Card: Push the SD card into the slot in the direction shown on the
camera (see SD icon by the SD card slot). Push the SD card until you hear a slight clicking
sound. This indicates the SD card has been inserted correctly.
Note
:
- After the camera is powered on, an SD icon will appear on the LCD display.
If you do not see the SD icon on the display, please check if the card was inserted properly.
- Make sure the SD card is not locked (check the lock switch on the side of the SD card). If
the SD card is locked this will prevent the camera from saving captured photos to the SD
card.
3)
Power On
Press the
POWER
button to turn on the camera.
Setting the Camera Language
1)
You will first be prompted to select a language for the camera. The Language selection
menu will appear. Select the language of your choice by pressing the
UP
and
DOWN
direction control buttons. Then press the
SET
button to confirm the selection.
2)
After selecting a language, you will be asked if you would like to continue with the initial
camera setup. A message will appear: “Continue with Camera Setup?” Select “Yes” to
