Vivitar Vivicam 3540, Руководство пользователя

Страница: 15 / 28

6. Self Timer mode :
Press the Mode button 2 times, you see the Timer icon is blinking. Press the Select button
to confirm. Press Mode button until the film counter is seen. Press the Shutter button to take
a photo after 10s. The beeper is ‘Do,Do..’ and the LED is blinking.
Timer icon is blinking. Press Shutter button to confirm.
7. Flash strobe mode :
Press the Select button you see the flash icon is on. The flash icon will fire if the light intensity
is too low.
Press Select Button once.
8. Battery Low Detection :
When the battery power is detected as Low, the last segment of the battery icon is shown.
If it is too low, the battery icon will blink as shown. Please change to new alkaline batteries.
Flash strobe cannot be turned on in this case.
Remarks :
ZOOM (2X)
The photo taken by 2X mode is the middle part of the SXGA image size. The resolution is
VGA 624x504 This is used for TV mode. You can see a 2X image on the TV screen.
Front LED indication :
Blinking taking a movie or charging the flash strobe
On Ready to take a photo.
Off Memory full or Power off.
TV SYSTEM : PAL OR NTSC
NTSC system is the preset TV system for this camera.
You can change this to PAL system. Press Mode button 2 times, the NTSC icon is
seen. Press the Select button one time it will toggle to PAL. Press the Mode button
until you see the film counter. When you insert the TV cable jack to the camera, the
TV system PAL icon will be displayed.
Recording a Movie
You can select the Movie mode in the Quality selection mode. Press the Mode button
once, press the Select button 4 times, you can see the Movie icon on. Press Mode
button until you see the film counter. Now the Movie mode is set.
Press the shutter and hold, you can hear a beep sound. Now the movie is being taken
and saving to the internal memory. The film counter is blinking. You can stop taking
movie at any time before it is automatically stopped.
The file size is about 4.5MB( if it is automatically stopped). The movie play back time
is not less than 30s related to the image information. (up to 50s).
Use as a PC camera
If you have set up the Microsoft Netmeeting (Windows 98 or higher), you can use
the camera for video conference like the web cam. Connect the camera to the PC
and power on the camera. Open the Netmeeting program and click on the video play
icon. It will search for the video source and then you can see the video taking by the
camera on the monitor screen. The resolution is set to 160x120 so that the speed
and quality are good enough. You can select Tools – Option – Video to change the
image size and quality.
Do not unplug the USB cord while it is doing PC camera mode.
14