11
What do the Sounds Mean?
If you hear this sound -
ECam is saying -
After ECam is switched on - two
short beeps (high pitch)
ECam is ready to take pictures
After you press the shutter
button - one short beep (high
pitch)
ECam has successfully taken a
picture. This is called the
"confirmation tone"
After you press the shutter
button - three short boops (low
pitch)
ECam is not ready. Either ECam
needs a little more time, or it is too
dark to take a picture
After one minute where no one
has paid attention to ECam -
two short beeps (high pitch)
ECam is bored and wasting
batteries. To save your battery you
should switch ECam off
After you press the shutter
button - one short beep (high
pitch) followed by four rapid
beeps
Memory warning - ECam has taken
21 images and it is close to being
full
After you press the shutter
button with the red LED ON - a
continuous sequence of rapid
beeps
Memory is full and you will erase all
24 images if you hold the shutter
down for more than 3 seconds
