6
When powering the digital video recorder ON for the
first time
the digital video recorder will take
you through the initial setup.
Powering
the
Digital Video Recorder
ON
1. Make sure the lithium battery has been charged and inserted properly.
To charge the lithium battery:
- Insert the battery into the Dock Charger (supplied)
- Connect the USB cable (supplied) to the Dock Charger and the other end of the cable
either to your computer USB slot or to the supplied AC Adapter (which you then plug into an
electrical outlet).
- Charge light will turn off when battery is fully charged.
2. Make sure an SD card has been properly inserted into your digital video recorder (inserted
until a click sound is heard).
Note:
After the digital video recorder is powered on, an SD icon will appear on the LCD
display. If you do not see the SD icon on the display, please check if the card was
inserted properly.
Important - You must use a Class 4 SD card or higher SD card only. Insert SD
Memory Card (up to 32GB) before use.
3. Flip open the LCD screen and press the
POWER
button
, located on the inside wall, to
turn on the digital video recorder.
Setting the Language
1. You will first be prompted to select a language for the camera. The Language selection
menu will appear. Select the language of your choice and press the
OK
button to confirm the
selection.
2. After selecting a language, you will be asked if you would like to continue with the initial
camera setup. A message will appear: “Continue with Camera Setup?” Select “Yes” to
continue or “No” to exit the setup.
