6
loses power and turns off or when the battery door is opened to replace the battery.
4.
In order to charge your lithium battery, make sure the battery is inserted correctly and then
connect your camera to the PC. The red LED will light up indicating that your camera is in
charging mode. The LED will switch off when your camera is fully charged.
Install SD Memory Card
Your camera has a memory card slot that enables you to insert any
“SD” compatible memory card up to 8BG.
An SD card is required for normal use. Adding a memory card will allow you to increase the capacity of your
camera before you have to transfer photos and videos to your PC. Install the SD memory card as below:
1.
Locate the Memory Card slot within the battery compartment.
2.
Insert the Memory card into the slot in the correct direction. (see the sketch below)
3.
Push the card in until you feel it
“click” into position. The top of the card should be flushed with the surface
of the camera. An icon
will appear on the LCD screen after you turn on your camera.
