6
EN
Section 2
Getting Started
Loading the Battery
Before using the camera, users must load the Lithium-ion
rechargeable battery come within the package.
1. Slide the safety latch to the unlocked position and open
the battery cover.
2. Insert the battery according to the correct polarity marks
( + or -).
3.
Close the battery cover firmly, and slide the safety latch
to the locked position.
Inserting and Removing an SD Card (Optional)
The camera comes with an internal memory which allows
you to store pictures and movies. You can expand the
memory capacity by using an optional SD/SDHC memory
card.
1. Insert the memory card into the slot. Please refer to the
figure on the right side.
2. To remove an installed SD card, press the card inwards
to release it.
3. When the card pops out, gently remove it from its slot.
4. Recommended memory capacity: 1GB or above.
Note
• When a memory card is fitted, movies/pictures are saved on the card rather than on the built-in
memory.
•
Protecting Data on an SD Card: SD Card is read-
only when it is locked. No pictures or movies can be
recorded when the SD card is locked. Make sure the
lock is on the writeable position before recording any
media.
Writeable
position
Write-Protected
Position
