Vivitar 63009, Руководство пользователя

Страница: 6 / 35

5
Preparing Your Camera for Use
Battery Installation
Your camera requires 2
“AAA” batteries (not included). Alkaline batteries are recommended.
1. Slide the battery compartment open on the bottom of the camera.
2. Insert the batteries in accordance with the polarity indicated on the inside of the battery
compartment.
3. Return and close the battery cover.
Note:

It is strongly recommend to download your photos and videos regularly to your computer.

Remove the batteries from the camera when not in use for an extended period.

Do not mix alkaline and non-alkaline batteries.

There are a few features that will not work if the battery power level is low.

When the battery power is low the battery icon turns red and the camera will automatically
turn off a few seconds later.
Inserting an SD Memory Card
An SD compatible memory card of up to 16GB (not included) should be inserted into your camera
to expand the amount of memory thus allowing an increase in the number of videos, photos and
audio that can be captured before transferring them to a computer.
1. Locate the SD card slot on the bottom of the camera.
2. Insert an SD memory card correctly in the direction shown.
3. Press the memory card until you hear a
“Click” sound. The memory card when properly
inserted will sit flush with the camera.
Note : After you insert an SD memory card, the icon will appear on the left side of the LCD,
indicating that your SD memory card has been installed successfully, and the media you capture
will now be stored on the card and not in internal memory.

This product supports SD cards of up to 16GB.