9
2.2.
Rear Panel Connections
The CLR-101B Camera Link
TM
Repeater rear panel is shown in Figure 2-3. The rear
panel contains a 26-pin MDR video connectors for connecting to the frame grabber and a
DC power jack. The MDR-26 connector is a 3M device as specified in the Camera Link
Spec.
The DC power jack is a circular locking type, Switchcraft p/n TRASM3MX. The DC
power jack accepts 5 to7 volts DC. Power jack pin assignments are shown in Figure 2-4.
The mating DC power plug is Switchcraft p/n TA3FLX.
Camera Link Repeater
5-7 VDC
FRAME GRABBER
Figure 2-3: CLR-101B Rear Panel
pin 1, + 5-7 vdc
pin 2, ground
pin 3, unused
Figure 2-4: Power Jack Pins
