1
1.
Introduction
1.1.
Overview
The CLM-601 Camera Link
TM
1
Multiplexer interfaces up-to four base configuration
Camera Link
TM
cameras to one frame grabber using standard Camera Link
TM
cables. This
capability supports applications requiring the ability to select between multiple cameras.
The CLM-601 incorporates high-speed (85 MHz) interfaces and works with any base
camera.
The CLM-601 provides multiple camera selection methods including rear-panel switch
settings, Camera Link
TM
interface signals (serial or camera control), and an external RS-
232 port. Medium configuration cameras are supported using two CLM-601s in parallel.
Multiple CLM-601s may be cascaded to support more than four cameras.
The CLM-601 Camera Link
TM
Multiplexer is housed in a sturdy, compact aluminum
enclosure and is well suited for industrial and OEM applications.
1
The Camera Link
TM
interface standard enables the interoperability of cameras and frame grabbers,
regardless of vendor. The Automated Imaging Association (AIA) sponsors the Camera Link
TM
program including the oversight Camera Link Committee, the self-certification program, and the
product registry. The Camera Link
TM
specification may be downloaded from the AIA website,
found at
www.machinevisiononline.org
Camera Link
TM
is a trademark of the Automated Imaging Association
Windows
TM
is a trademark of Microsoft Corporation
HyperTerminal
TM
is a trademark of Hilgraeve Inc.
