VIVESS PRW11001SW, Руководство пользователя

Страница: 26 / 36

English
49
4. Operating instructions
7. Press the button / (13) or button / (15), to
set the day.
8. Press the button (3), to switch to setting the
time format. The time format “24 hr” flashes on the display
(18).
9. Press the button / (13) or button / (15),
to set the time format. The following settings are possible:
Display Time format
24 hr 24 hours
12 hr 12 hours
10. Press the button (3), to switch to setting
the hours. The hours “00” are flashing in first place and the
minutes “00” in second place on the display (18).
11. Press the button / (13) or button / (15), to
set the hours.
12. Press the button (3), to switch to setting the
minutes.
4. Operating instructions
13. Press the button / (13) or button / (15), to
set the minutes.
14. Press the button (3) to complete the settings.
The display (18) shows the set time.
English
50
4. Operating instructions
15. Press the button / (13), to display the set date.
Pressing once will display the year. Press the button again
to show the month and day. After about 7 seconds, the set
time will be displayed again.
Note: If no button is being pressed within about
5 seconds, the previously set time will be shown on
display (18). The performed settings were not saved.
4.6 Summer / winter time function
This function makes it possible to switch between summer and
winter time, without having to set the time again.
1. Ensure the radio function is switched off.
2. Press the button for about 4 seconds to switch between
summer and winter time. 1 hour will be added to the displayed
time. If the button is pressed again, 1 hour will be subtracted.
4.7 Projector function
This function makes it possible to project the set time onto a
wall or ceiling.
WARNING - Do not look directly into the projection
beam.
Note: The projector function works best in darkened
rooms. The used wall / ceiling can be between 90 cm
and 275 cm away.
1. Press the button (1), to switch the projector function
on or off.