Safety information
free flex, User manual & Installation guide
page of
2
11
! Warning
Please read the assembly instructions included carefully. Please read
this free flex user manual completely before using your free. Please
follow the instructions and recommendations to ensure proper use
and maximum enjoyment.
Safety
information
free flex is intended for use in enclosed and dry living spaces.
The following conditions must be provided:
- Operating temperature between 0° C (32° F) and 35° C (95° F).
- Relative humidity (during use): 20
% to 90
%, non-condensing.
- No external environmental influences such as oil, chemicals, salt,
extensive dust, etc.
Installation, service or repairs, if necessary, may only be performed by
authorized persons.
The maximum altitude is 2.000m.
The installer is responsible for selecting the proper mounting location
and safe installation of free flex. This also applies to installation in
movable parts, such as doors. The installer is responsible for
performing and documenting all necessary safety tests.
All electrical installation work may only be conducted by authorized,
trained electricians, always adhering to the general rules and
regulations applying to electrical installation.
Should it become apparent that safe operation of free flex is not
assured, then free must immediately be taken out of service and
secured against potential misuse. If the free flex functions are limited,
blocked or disabled, if an unusual odor is present, if noises such as
scratching are audible or damage is visible, safe operation can no
longer be guaranteed.
Care and
Cleansing
Cleanse your free flex as needed with a soft micro fiber cloth and clear
water only. Dampen the micro fiber cloth and wipe the surfaces gently.
Use stainless steel cleaner to clean pipe and base.
! WARNING:
The interior of the free flex must remain dry. To ensure
this, use only a damp cloth for cleansing.
! WARNING:
Never scratch, scrape or scrub free flex surfaces with
abrasive materials.
!
